Toa M-864D Ver.2.2.0 - Manual (Page 80)

80
Step 2. Match both setting data of the PC and the unit if not identical.
To enable communications between the PC and the unit, both setting data must be the same.
If data is different between the PC and the target unit, the Communication screen appears indicating
“Different” in the Status column during connection.
Designate the transfer direction “PC >> Unit” or “Unit >> PC,” and click the [Update] button. Then, all
unmatched setting data is simultaneously transferred in the designated direction.
Step 3. Select [Network Disconnect] from the menu.
This terminates communications between a PC and the unit.