Toa M-864D Ver.2.2.0 - Manual (Page 36)

36
[assign]
Displays the monaural output (1 – 4) assignment.
A yellow triangle is displayed if Assign is set to ON, and a gray triangle if set to OFF.
The triangle varies in size depending on gain.
For Assign settings, see p. 61 , “Function Box.”
[Channel information]
The stereo input’s channel numbers and channel names are displayed.
[Channel oN/off button]
Switches the channel to ON or OFF.
This setting interlocks with the grouping setting for EXT VOL.
[total gain]
Displays a total gain value of the FRONT fader (fader on the unit’s front panel) gain, PC VOL. (PC software
fader) gain and EXT VOL. (external ZM Remote controller, etc.) gain.
The green bar on the left indicates total gain value.
Note: Gains for both L and R stereo channels are interlocked.
[Grouping number]
Displays the PC (software) fader’s grouping number.
Clicking this button opens the dialog for selecting the grouping number.
The color corresponding to the group is displayed to the right of the grouping
number.
Further, the grouping settings for EXT VOL. gains (external control of the
ZM Remote controller, etc.) are displayed far right of the box in the color
corresponding to the group.
Grouping setting for EXT VOL. gain
(Figure at left shows Group 7 settings.)
Note: Displayed in black when no groups have been set.
PC fader grouping number
Note: The “None” indication is displayed when no groups have been set.
[PC fader gain]
Displays PC software fader gains in dB.
Clicking the box displays the dialog for gain settings, allowing gain values to be entered.
The gain is interlocked with the fader shown on the next page .
Group No. Color
None Black
1 Red
2 Orange
3 Yellow
4 Yellow-green
5 Green
6 Light blue
7 Blue
8 Dark blue
9 Purple
10 Gray