Toa M-864D Ver.2.2.0 - Manual (Page 111)

111
[Event type and Contents]
Event type Contents
Front panel operation
LOW CUT Input channel OFF/ON
FBS Input channel OFF/ON
MONO Input channel OFF/ON
TONE Input channel
GAIN Input channel
TRIM Input source
ARC Output channel Enable/Disable
RECOUT Output channel
ASSIGN Input channel OFF/ON Output channel
FADER
Input and Output
channel
Fader value -60
dB or more/under
-60 dB
PRESET Preset number LOAD/STORE
LOCK OFF/ON
Contact input
Contact input
number
OFF/ON
ZM Remote controller
operation
Remote controller
address
Button number,
Volume
LED lit
External control
protocol *1
Receiving data
(Max. 18 bytes)
External control
command
Reception/Send
type
Receiving/Sending
data (Max. 17 bytes)
Automute operation
Monaural input
channel *2
System
System Startup/
Reset
PC connection/
disconnection
Local ON/OFF
*1 Only the data of which command is correctly configured is saved in the operation log for the External control
protocol. When receiving the data exceeding 18 bytes in length, only the commands 80H through FFH are
saved.
Data length and data itself contained in the command configuration are not saved.
(Example)
Receiving data (25 bytes): 9203000001 9203000101 9203000201 9203000301 9203000401
Data saved in the log file: 9292929292
*2 Triggered channel