Toa M-864D Ver.2.2.0 - Manual (Page 88)

88
4. type
The ZM Remote Controller’s type is displayed.
: ZM-9011
: ZM-9012
: ZM-9013
: ZM-9014
: None
5. Button or Volume Control No.
The ZM Remote Controller’s button number or
volume control number is displayed.
6. Name
The names of the ZM Remote Controller’s buttons
and volume control are displayed.
Clicking this button permits the name to be
entered.
7. function Button
Functions assigned to the ZM Remote Controller’s
buttons and volume control are displayed.
Functions can be selected by clicking the Function
column button.
When no functions are assigned to the button,
select “None.”
8. Parameter 1 Button
Parameter settings corresponding to the function
assigned in the Function column are displayed.
Clicking the Parameter 1 button allows the
first parameter to be selected. Note that some
assigned functions have no parameters.
9. Parameter 2 Button
Parameter settings corresponding to the function
assigned in the Function column are displayed.
Clicking the Parameter 2 Button allows the
second parameter to be selected. Note that some
assigned functions have no parameters.
10.4.1. assigning button functions
The following functions can be set for each button on the ZM Remote Controller:
[Channel on/off]
Switches the specified channel On or Off.
Select the channel in the “Channel Kind” column of Parameter 1 and the “Channel No.” column of Parameter 2.
Parameter 1 Parameter 2
Channel Kind Channel No.
Mono In 1 – 8
Stereo In 1 – 2
Mono Out 1 – 4
Rec Out L, R
Channels toggle between On and Off with each depression of the ZM Remote Controller’s button.