Toa M-864D Ver.2.2.0 - Manual (Page 27)

27
[fader]
Displays individual gain values of the FRONT fader (fader on the unit’s front panel), PC VOL. (setting software
fader) and EXT VOL. (external control of the ZM Remote controller, etc.), as well as their total gain value.
When grouping has been set, the corresponding group number is displayed.
Each gain is also indicated by a bar extending from the left.
Faders set to “Disable” in the fader settings (see p. 99 ) are not displayed.
The FRONT fader gain is displayed only while in online mode.
When in offline mode, the total gain is obtained as 0 dB of the FRONT fader gain.
Note: Faders set to “Disable” are fixed at 0 dB gain.
For fader settings, see p. 49 , “Function Box.”
[Level meter]
Displays the monaural output level.
The pre-attenuator processing level is displayed.
The level meter box is only displayed while in online mode.
[attenuator]
Displays attenuator gains (dB).
Gains are also indicated by a bar extending from the left.
For attenuator settings, see p. 70 , “Function Box.”
[Channel information]
The monaural output’s channel numbers and channel names are displayed.
Channel No.
Channel name