Toa M-864D Ver.2.2.0 - Manual (Page 43)

43
[Grouping number]
Displays the PC (software) fader’s grouping number.
Clicking this button opens the dialog for selecting the grouping number.
The color corresponding to the group is displayed to the right of the grouping
number.
Further, the grouping settings for REC OUT VOL. gains (REC OUT volume
control on the unit’s front panel) are displayed far left of the box, and those for
EXT VOL. gains (external control of the ZM Remote controller) are displayed
far right in the color corresponding to the group.
Grouping setting for EXT VOL. gains
(Figure at left shows Group 2 settings.)
Note: Displayed in black when no groups have been set.
PC fader grouping number
Note: The “None” indication is displayed when no groups have been set.
Grouping setting for REC OUT VOL. gains
(Example of Group 1 settings)
Note: Displayed in black when no groups have been set.
[PC fader gain]
Displays PC software fader gains in dB. Clicking the box displays the dialog for gain settings, allowing gain
values to be entered. The gain is interlocked with the fader shown below.
[PC fader]
The PC software fader is operational and interlocked with the PC fader gains (mentioned above).
The yellow bar at left indicates the REC OUT VOL. (REC OUT volume control on the unit’s front panel) gains.
The green bar at right indicates the EXT VOL. (external control of the ZM Remote Control, etc.) gains.
REC OUT VOL. gain bar EXT VOL. gain bar
Faders set to “Disable” in the configuration settings (see p. 99 ) are not displayed.
Note: Faders set to “Disable” are fixed at 0 dB gain.
[fader button]
Clicking this button displays the pop-up sub-view for fader detail settings, allowing the fader settings to be
changed. (See p. 50 .)
Group No. Color
None Black
1 Red
2 Orange
3 Yellow
4 Yellow-green
5 Green
6 Light blue
7 Blue
8 Dark blue
9 Purple
10 Gray