Toa M-864D Ver.2.2.0 - Manual (Page 28)

28
6.1.5. recording output
Two-channel recording outputs have the following boxes:
[fader]
Displays individual gain values of the REC OUT VOL. (volume control on the unit’s front panel), PC VOL. (PC
software fader) and EXT VOL. (external control of the ZM Remote controller, etc.), as well as their total gain
value.
When grouping has been set, the corresponding group number is displayed.
Each gain is also indicated by a bar extending from the left.
Faders set to “Disable” in the configuration settings (see p. 99 ) are not displayed.
Note: Faders set to “Disable” are fixed at 0 dB gain.
For fader settings, see p. 49 , “Function Box.”
[Level meter]
Displays the recording output level.
The pre-attenuator processing level is displayed.
The level meter box is only displayed while in online mode.
[attenuator]
Displays attenuator gains (dB).
Gains are also indicated by a bar extending from the left.
For attenuator settings, see p. 70 , “Function Box.”
[Channel information]
The recording output’s channel numbers and channel names are displayed.
Channel No. (L, R)
Channel name