Toa M-864D Ver.2.2.0 - Manual (Page 81)

81
10. reMote SettINGS
Set contact input and output functions, ZM Remote Controller control functions, and the external control port.
10.1. remote function overview
10.1.1. Contact input and output functions
Various functions can be allocated to the contact input and output by changing the settings on the contact input
and contact output setting screens. To permit external control by connected equipment, short terminals 1 – 8
to the C terminal. For example, when terminals 1 – 8 have been allocated to Preset Memory Nos. 1 – 8 in the
contact input settings, shorting individual terminals to the C terminal allows Preset Memory Nos. 1 – 8 to be
called up.
(1) Contact input functions
None (unused)
Channel On/Off
EXT VOL. Up/Down
ST Line Source Select
Preset Memory Load
Remote Command
(2) Contact output functions
Break
Make
Channel On/Off
ST Line Source Select
Preset Memory Load
Contact Through Out
Remote Switched Out
Fader Tally
For details, see p. 82 , “Contact Input Settings” and p. 84 , “Contact Output Settings.”
10.1.2. ZM remote Controller control functions
The ZM Remote Controller Settings screen permits various functions to be allocated to the remote controller.
ZM remote Controller control button functions
None (unused)
Channel On/Off
EXT VOL. Gain
ST Line Source Select
Matrix Crosspoint Assign
Matrix Crosspoint Gain
Preset Memory Load
Remote Switched Out
Remote Command
EXT VOL. GainCS(H) (ZM-9014 only)
Matrix Crosspoint GainCS(E) (ZM-9014 only)
ZM remote Controller volume control functions
None (unused)
EXT VOL. Gain
Matrix Crosspoint Gain
EXT VOL. GainCS(H) (ZM-9014 only)
Matrix Crosspoint GainCS(E) (ZM-9014 only)
For details, see p. 87 , “ZM Remote Controller Settings.”