Pilz PSSnet SHL 8T MRP - Manual (Page 138)

Diagnosis
138
7.11 Service mode
PSSnet SHL - Web- based Interface
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
Deactivate “Mode”.
Click on “Set” to deactivate the service mode.
This prevents the device from switching to the service mode if the
redundant voltage supply fails.
Note: After the service mode is deactivated, the device takes on its previous
settings again.
Figure 51: Service Mode dialog - mode deactivated