Pilz PSSnet SHL 8T MRP - Manual (Page 32)

Basic Settings
32
1.6 Load/Save
PSSnet SHL - Web- based Interface
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
If you change the current configuration (for example, by switching a port off),
the load/save symbol in the menu area changes from a disk symbol into a
yellow triangle. After saving the configuration, the load/save symbol changes
back into the disk symbol.
1.6.3 URL
The URL identifies the path to the tftp server on which the configuration file
is to be stored. The URL is in the format: tftp://IP address of the tftp server/
path name/file name (e.g. tftp://192.168.1.100/product/con-
fig.dat).
The configuration file includes all configuration data, including the password.
Therefore pay attention to the access rights on the tftp server.
1.6.4 Deleting a configuration
In the "Delete" frame, you have the option to
X Reset the current configuration to the state on delivery. The configuration
saved on the device is retained.
X Reset the to the state on delivery. After the next restart, the IP address is
also in the state on delivery.