Pilz PSSnet SHL 8T MRP - Manual (Page 143)

Advanced
PSSnet SHL - Web- based Interface
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
8.2 Industrial Protocols
143
8.2.1 PROFINET IO
To integrate this into a control system,
activate the function in the "ProfinetIO" frame
click on "Download GSDML File" to load the GSDML file onto your PC
in the Basic Settings:Network dialog, check whether Local is
selected in the "Mode" frame (see on page 21 „Network“) ,
in the Switching:VLAN:Global dialog, check whether "VLAN 0
Transparent Mode" is selected (see on page 86 „VLAN Global“) ,
configure the alarm settings and the threshold values for the alarms you
want to monitor
(see on page 142 „Device Status“) ,
configure the SPS as described in the "Industry Protocols" user manual
8.2.2 EtherNet/IP
To integrate this into a control system,
activate the function in the "EtherNet/IP" frame
click on "Download EDS File" to load the EDS file onto your PC
in the Switching: Multicasts dialog, check whether IGMP Snooping
is activated (see on page 78 „Multicasts“) ,
configure the SPS as described in the "Industry Protocols" user manual