Pilz PSSnet SHL 8T MRP - Manual (Page 70)

Switching
70
4.4 Multicasts
PSSnet SHL - Web- based Interface
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
Note: If the device is connected to a HIPER-Ring, in the case of a ring inter-
ruption you can ensure quick reconfiguration of the network for data packets
with registered Multicast destination addresses by:
X enabling IGMP on the ring ports and globally, and
X enabling "IGMP Forward All" per port on the ring ports.
Static Query Port The device sends IGMP report mes-
sages to the ports at which it receives
IGMP queries (default setting). This
column allows you to also send IGMP
report messages to: other selected
ports (enable) or connected
Hirschmann devices (automatic).
Prerequisite: In the
Switching:Multicasts:Global
Settings dialog, the IGMP Snoop-
ing mode is selected. enable,
disable,
automatic disable
Learned Query
Port Shows at which ports the device has
received IGMP queries, if “disable” is
selected in “Static Query Port”.
Prerequisite: In the
Switching:Multicasts:Global
Settings dialog, the IGMP Snoop-
ing mode is selected. Yes/No
Parameter Meaning Value range Default setting
Table 17: Settings per port