Casella CEL CEL-63X - Manual (Page 33)

CEL-63x Environmental & Occupational Noise Meter
33 Casella CEL
Menu screens
The CEL-63x instrument‟s Menu mode has three options:
The Settings option allows you to change the
instrument‟s setup.
The Memory results option allows you to view
information stored in the instrument‟s internal memory.
The Instrument status option displays the instrument‟s current
operating status.
Settings
There are seven main options in the Settings screen:
Setup allows you to set the measurement view or to
create user-defined measurement views.
Set Clock allows you to set the date and time, or to
change the date and time settings.
Language allows you to set the language used for the
instrument‟s screens.
Backlight allows you to set the duration and level of backlight
illumination.
Measurement Control allows you to set the method used to start and
stop measurements, and allows you to set whether you are measuring
Cumulative or Periodic data sets.
Calibration reference level allows you to set the instrument to use the
correct sound pressure level for the calibrator.
Audio Recording allows the audio to be recorded for audio notes (all
models), for markers and events (CEL-632 & CEL-633), as well as the
pre-trigger and quality of audio recording.
Meter Mode allows you to select either octave or ⅓-octave
measurements on B & C models.
Setup
The CEL-63x instrument has up to six fixed measurement views, and two user-
defined measurement views.
Measurement View
This screen allows you to set a fixed measurement view or a
user-defined measurement view.
The fixed measurement views have functions that are defined to
meet national regulations. You cannot change these functions.
This screen shows the measurement view that is active, and allows you to select
a different measurement view.