Casella CEL CEL-63X - Manual (Page 87)

CEL-63x Environmental & Occupational Noise Meter
87 Casella CEL
Octave or 1/3 Octave Period Result line :-
If the 1/1, 1/3 Octave L
eq
is enabled and the meter has octave or third octave
filters then an Octave Period result line is output with 11 x Octave band L
eqs
or a
third octave Period result line is output with 33 x 1/3 octave L
eqs
.
These are in format:-
<1/1 OCT LwEQ>, YYYY-MM-DD, HH:MM:SS, freq1, value1, freq2,
value2…freq11, value11
<1/3 OCT LwEQ>, YYYY-MM-DD, HH:MM:SS, freq1, value1, freq2,
value2….freq33, value33
Where LwEQ = L
ZEQ
,L
CEQ
or L
AEQ
depending on the setup octave weighting e.g.
<1/1 OCT L
Ceq
>, 2010-05-07, 15:23:45, 16Hz, 32.4, 32Hz, 67.2......... 16 KHz,
54.2
<1/3 OCT L
Ceq
>, 2010-05-07, 15:23:45, 12.5Hz, 32.3, 16Hz, 43.2.... 20 KHz,
32.7
NOTE
„Environmental 2‟ setup should be selected when used with the Multi Agent Monitor
(MAM), see MAM operator instructions for further details.
RS232 Data Format
The online mode uses 1 start bit, 8 data and 2 Stop bits with NO parity with a
baud-rate between 1200 and 115,200. Ensure that the receiver is set to the same
baud-rate and data format.
The Comma Delimited ASCII data format can be directly input into a standard
terminal emulation program (e.g. Microsoft HyperTerminal) and can be saved
as a standard text file which can be exported to most spread sheets e.g. excel.