Pengo TruLink - Manual (Page 36)

36 PENGO TruLink Manual
After the Brightness box has been selected use
the Up or Down arrow buttons located on the
Display to modify the value from 0 to 100%.
When the Brightness is at its desired setting press the
Menu/Back button at the bottom of the display.
4
3
5
Select the Setup box from the Setup menu.
Select Time & Date from the menu. A service
code screen will appear. Type in the code 1234
and then select Enter.
5
The date can be formatted several ways:
DD_MM_YYYY or MM_DD_YYYY.
Time formatting includes 12H and 24H. 6
To access the Time & Date menu screen a password is
required.
The default password is 1234
2
ADJUSTING DISPLAY BRIGHTNESS:
Select Menu located on the bottom left of the
screen. This will bring up the Main Menu screen. 1
Select Menu. Under the SetUp screen select
SetUp. 2
1
When SetUp appears select Brightness. 3
DISPLAY ADJUSTMENT GUIDE (8” DISPLAY)
ADJUSTING TIME and DATE:
Two main areas that may require adjustment on the
Display before it can be used are:
Screen Brightness & Time / Date.
Follow steps 1 and 2 to get to the SetUp screen. Follow
steps 5 thru 6 to adjust time and date.
5a