TabletKiosk eo TufTab a7230X - Manual (Page 17)

2 Chapter 01: Getting Started
6. System Restore Disc 1
7. Standard a7230X Battery Packs
8. Stylus Pen and Tether
Setting Up Your eo TufTab Ultra-Mobile PC
Please read the following steps to begin using your new Ultra-
Mobile PC as quickly and easily as possible.
1. Inserting the Battery Packs if your Ultra-Mobile PC shipped
from the dealer without pre-inserted batteries.
2. Connecting the eo TufTab Ultra-Mobile PC to an external
power source.
3. Connecting applicable peripherals and networking cables.
4. Powering on the eo TufTab Ultra-Mobile PC
5. Completing the Operating System Installation
Step 1: Inserting the Battery Packs
Turn the eo TufTab Ultra-Mobile PC over and place it, screen
down on a solid, flat surface.
NOTE: Make sure to write down the Product Key on the Windows® 7
COA sticker located in the battery bay before inserting the batteries as
you may need it to Activate Windows® 7 later in the set-up.
Inserting the Battery Packs
Orient the first battery so that its power port is pointing toward
the bottom of the a7230X. Place the top of the battery in the
battery one (1) bay first and then lay the bottom side down and
press until it is flush in place. Still pressing on the battery, slide
the locking tab to the “LOCK” position until it clicks into place.
This might take a little effort as the locking mechanism is tight
1 Please be sure to check that the System Restore Disc matches the Operating
System (OS) installed on your eo TufTab a7230X. Some units may include a
restore image on the internal hard drive in addition to, or in lieu of, a system
restore disc.