TabletKiosk eo TufTab a7230X - Manual (Page 18)

Chapter 01: Getting Started 3
in order to protect the battery from damage if the system is
dropped. Repeat the same procedure for battery two (2).
To Remove the Lithium-Ion Battery Packs
Slide the locking tab of the battery you wish to remove to
the “UNLOCK” position. Lift the battery from the bottom
edge upward to lift the battery out of the battery bay. Repeat
the same procedure for the remaining battery.
Step 2: Connecting the eo TufTab to an External Power Source
Locate the AC adapter and the power cord. Plug the power cord
securely into the AC adapter. Plug the AC adapter’s connection
cable into the “DC Power In” port on the left side of the tablet.
Once the adapter plug is securely in place, plug the power cord
into an external power socket.
Inserting the batteries: shown is battery 1 being
inserted. Repeat procedure to insert battery 2.
Removing the batteries: shown is battery 2 being
removed. Repeat procedure to remove battery 1.
!
!
!
@
@
@