Becker TRAFFIC ASSIST Z200 - Manual (Page 104)

104
>>> SETTINGS
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Calibration
If the touch-screen reacts incorrectly
to the touching of the screen in specific ar-
eas, calibration is required.
Starting calibration
The calibration can be started using the
following button.
> Push the button Calibration .
The calibration process is started.
You will be guided through the procedure
by means of text instructions.
Language
The text of the touch-screen images can be
displayed in various languages.
Calling up language selection
The following button allows selection of
various different languages.
> Push the button
Language .
The language selection appears.
In the language selection, the available
languages are shown in a list which ex-
tends over several pages. Each list area is a
contact surface. The individual contact
surfaces are marked with the language des-
ignation and the associated national flag.
Turn the page
These buttons
allow page
turning in the direction shown by the ar-
row through the pages of the list.
The current page of the list and the total
number of pages is shown between the
buttons.
Selecting the language
If you change the language the software
restarts.
> Push the contact area of the desired lan-
guage.
Cancelling the language selection
The language selection is closed by push-
ing the key
, and the setting menu then
appears.