Becker TRAFFIC ASSIST Z200 - Manual (Page 55)

55
NAVIGATIONAL MODE >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
> Switch to the selection between Ad-
dress , Point of interest or Select on
map by pressing the Other destination
button and then enter the intermediate
destination.
> Repeat these entries in the route plan-
ning window for each intermediate des-
tination by pressing
Add .
> You can move the individual entries by
pressing the but-
tons.
> Once all the entries have been made in
the route planning window, save the
destination data by pressing the
OK
button.
The entry menu appears.
> Give the destination a meaningful
name.
> Press
OK .
Route planning is complete. The Routing
options entry window opens.
The Edit key
Existing routes can be changed in the Edit
menu.
> Press the Edit key to change existing
routes.
The route planning window appears. The
following functions are available:
The Calculate key
A planned route can also be calculated
without GPS reception so that you can get
an overview of the journey.
When doing this, the first route point
specified is used as the starting point for
the route.
> Press the button Calculate to have the
total distance and probable length of
the journey calculated for this route.
The Routing options entry window is
opened.
Key Meaning
Add This box can be used to
enter a new route point.
Delete This box can be
used to delete a high-
lighted route point.
OK This box can be used to
save the processed route
and transfer it to rapid
access.
These keys can be used to
scroll up and down
through the lists.
Individual entries can be
moved using these but-
tons.
Note:
During navigation, your current location
is the starting point used. The first leg is
then the journey to the first route point
specified.