Becker TRAFFIC ASSIST Z200 - Manual (Page 70)

70
>>> NAVIGATIONAL MODE
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Offroad navigation
Depending upon which setting has been
made under "The Offroad button" on
page 66, you can start route guidance if
you are currently in a non-digitised area or
if your destination is located in a non-dig-
itised area.
If the offroad function is activated, the
Traffic Assist guides you:
• to the nearest digitised road or
• from the digitised road nearest to the
destination, to the destination in the
non-digitised area.
Destination in the offroad
area
You can select a destination in a non-dig-
itised area (offroad) via coordinate entry
("Navigation menu: Enter coordinates"
on page 56) or via direct selection on the
map ("Navigation menu: Select on map"
on page 52).
After you have entered the destination and
started route guidance, the Traffic Assist
guides you directly to the digitised road
nearest to the offroad destination.
When you have reached the calculated
point on the digitised road (grey destina-
tion flag), the Traffic Assist indicates the
direction to the offroad destination via a
direction arrow.
Starting point in the offroad
area
If you start route guidance in a non-digi-
tised area, the Traffic Assist displays the
direction of the nearest digitised road.
The point at which you reach the digitised
road is indicated by a grey destination
flag. When you have reached the digitised
road, route guidance continues with
standard instructions.
Note on legal situation:
Observe the applicable regulations in the
country in which you are currently driv-
ing.
Driving a vehicle off official roads is not
permissible in all countries.