Becker TRAFFIC ASSIST Z200 - Manual (Page 88)

88
>>> TELEPHONE MODE
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Searching for a mobile phone
> Open the device list.
> Press the Search for phones button.
The search starts.
During the search, any devices found are
displayed and the search can be cancelled
by pressing the
Cancel button.
After the search or after pressing the Can-
cel button, a list of the devices found is
displayed.
> Now press on the name of the mobile
phone to be connected.
The Traffic Assist then tries to establish
the connection. The mobile phone should
then prompt you to enter a password.
This password is stipulated by the Traffic
Assist.
> Enter the displayed password on the
mobile phone.
The connection is established. If the con-
nection is successfully established, the tel-
ephone fast access function is displayed.
Connecting from the device list
You can initiate a connection to a mobile
phone from the device list. If a mobile
phone is already connected, that connec-
tion will be terminated and a connection
will be established to the selected mobile
phone.
> Open the device list.
> Press on the desired mobile phone in
the list.
A connection to the selected mobile
phone will be established. If the connec-
tion is successfully established, the tele-
phone fast access function is displayed.
Note:
Before searching, activate Bluetooth® on
the mobile phone to be searched for.