Switching the traffic assist on/off, Switching on, General operation – Becker TRAFFIC ASSIST Z200 User Manual

Page 26

Advertising
background image

26

>>>

GENERAL OPERATION

> D

> GB

> F

> I

> E

> P

> NL

> DK

> S

> N

> FIN

> TR

> GR

> PL

> CZ

> H

> SK

Audio signal output
You can connect your Traffic Assist to
your audio system using an optionally
available cable for output of the audio sig-
nal.
If the cable is correctly connected, you can
then output the audio signal via the vehi-
cle audio system.

External microphone
You can connect an external microphone
to your Traffic Assist using an optionally
available cable.

Switching the Traffic Assist
on/off

The unit is switched on and off using the
key .

Switching on

> Set the On/Off switch on the left side of

the unit to On.

> Press the key

for a few seconds.

The unit is switched on. The manufactur-
er's logo appears on the touch screen.

After you have activated PIN protection
(see page 107), the PIN number is then
requested.

> Enter the PIN number using buttons

to

.

Note:
Please deactivate the Becker moodlights
while driving in your vehicle in order to
prevent visual distraction from the road
traffic!

Advertising
This manual is related to the following products: