Becker TRAFFIC ASSIST Z200 - Manual (Page 34)

34
>>> GENERAL OPERATION
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Volume control
The volume can be adjusted both via the
integrated volume control on the Traffic
Assist and in the various applications.
The volume control is located on the
right side of the unit Traffic Assist.
> In order to increase or reduce the vol-
ume, press the volume control upwards
or downwards.
or
> Press the volume control in order to
mute the Traffic Assist.
More maps
A map set is already installed on the me-
mory card on delivery. In case this does
not cover the desired country, an additio-
nal map set is available on the accompa-
nying DVD. The countries covered by
the individual map sets can be checked
using the installer prior to installation.
If you should lose the supplied memory
card or if it should become defective, the
map set can be installed on another mem-
ory card.
Installation program
There is a map installation program on
the map DVD. Once the DVD is inserted
in a personal computer's DVD drive, this
program will usually start up automatical-
ly. The program guides you through the
installation process.
Otherwise, you will have to start the pro-
gram manually.
> Open Windows
® Explorer.
> Select your DVD drive folder.
> Double click on the "Setup.exe" file.
Transferring files
Files can be transferred indirectly via the
memory card or directly via the USB port.
Transferring using the SD
card reader
The simplest and fastest form of transfer is
to use a standard SD card reader (does not
fall within the scope of supply). The
memory card is plugged into this.
The files required are then saved on
the memory card using the computer's
software.
Note:
A description of volume adjustment in
the various applications is described in
the individual chapters.
1
1
Note:
Only the maps supplied in the Traffic As-
sist may be used. The installation or
transfer of files or programs which limit
or modify the function of the Traffic As-
sist is prohibited!