Becker TRAFFIC ASSIST Z200 - Manual (Page 48)

48
>>> NAVIGATIONAL MODE
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
> Press the button to start route
guidance to the entered coordinates.
Saving destination
The
Save button opens an entry menu for
entering a name for the destination en-
tered. If a name has been entered and
adopted using
OK , the destination is
transferred to rapid access and protected
there. The entry menu allows you to
change between upper and lower case let-
ters.
Starting navigation
The
Start button can be used to start nav-
igation straight away. All the data entered
so far is processed in the route calculation.
> Press the
Start key to start navigation.
The route is calculated. The map display
then appears and directions to the destina-
tion begin.
Setting Meaning
Allowed With this option, the
corresponding road type
is included in the route
calculation.
Avoid With this option, wher-
ever possible, the corre-
sponding road type is
avoided.
Not permitted With this option, the
corresponding road type
is not included in the
route calculation.
Note:
If no GPS signal is available at the time of
route calculation, the following display
appears.
If the GPS signal is available, route calcu-
lation is started automatically.
A short route to the selected destination
is displayed when
Simulation is pressed.
A demonstration video is shown by press-
ing
Demo .