Kawai CN35 Owner’s Manual - Manual (Page 100)

100
Set
tings
Virtual Technician
2-10
Minimum Touch
The Minimum Touch setting allows the minimum key velocity required to produce a sound to be adjusted. By
default, this setting attempts to recreate the extremely fine touch sensitivity of a concert grand piano, allowing
a very soft sound to be produced with the slightest of key touches. However, it may be desirable to reduce this
sensitivity, when wishing to recreate the sensitivity of a small grand piano or an upright piano.
* This Virtual Technician setting will affect piano sound, Classic E.P., 60’s E.P., Classic E.P. 2 and Classic E.P. 3 sound.
1. Selecting the Minimum Touch setting
After entering the Virtual Technician menu (page 89):
Press the d or c MENU buttons to select the Minimum Touch
setting.
2. Adjusting the Minimum Touch volume
Press the d or c VALUE buttons to adjust the volume of the
Minimum Touch setting.
* The Minimum Touch volume can be adjusted within the range of 1
- 20, with larger values resulting in a less sensitive key touch.
* Any changes made to the Minimum Touch setting will remain until
the power is turned off.
* Preferred Minimum Touch settings can be stored to a Registration
memory for convenient recall. Please refer to page 34 for more
information.
3. Exiting the Minimum Touch setting
Press the d and c MENU buttons simultaneously to exit the
Minimum Touch setting and return to the main settings menu.
2-10 Minim.Touch
= 1
2-10 Minim.Touch
= 9
2-10 Minim.Touch
= 1