Kawai CN35 Owner’s Manual - Manual (Page 76)

76
Set
tings
The Basic settings menu contains settings to adjust the pitch, tuning, and general sound of the instrument.
This menu also allows favourite panel settings to be stored, or reset back to the original factory configuration.
„
Basic Settings
Page no. Setting Description Default setting
1-1 Tone Control Change the tone settings of the instrument’s sound. Off
1-2 Speaker Volume Change the maximum volume level of the speaker output. Normal
1-3 Phones Volume Change the maximum volume level of the headphones output. Normal
1-4 Line Out Volume Adjust the output volume of the Line Out connectors. 10
1-5 Audio Rec Gain Increase or decrease the recording level of the MP3/WAV audio recorder. 0 dB
1-6 Tuning Increase or decrease the pitch of the instrument in 0.5 Hz steps. 440.0 Hz
1-7 Damper Hold Change the effect of pressing the sustain pedal on organ, string, etc. sounds. Off
1-8 Four Hands Enable the ‘Four Hands Mode’ function. Off
1-9 Startup Setting Store current panel settings as the default (power-on) configuration. -
1-10 Factory Reset Restore all panel settings to the original factory configuration. -
* Default settings will be shown in the first LCD display illustration (i.e. Step 1) for each setting explanation below.
„
Entering the Basic Settings menu
While the normal playing mode screen is shown in the LCD display:
Press the d or c MENU buttons.
The Basic Settings page will be shown in the LCD display.
1 Basic Settings
“1SFTT 7"-6&è
Press the VALUE c button to enter the Basic Settings menu.
The first page of the Basic Settings menu will be shown in the
LCD display
„ Selecting the desired setting
After entering the Basic Settings menu:
Press the d or c MENU buttons to cycle through the different
settings pages.
Settings page no.
1-1 Tone Control
= Off
Basic Settings