Kawai CN35 Owner’s Manual - Manual (Page 68)

68
U
SB
Func
tions
USB Menu
2
Load Registration
The Load Registration function is used to load registration memories stored on a USB memory device into the
instrument’s internal memory. There are two types of registration file: ‘Single’ and ‘All’. Note that only registration
files saved on the CN34 or CN35 digital piano can be loaded.
„
Registration file types
Registration type Description File extension
Single A file containing a single registration memory. KM6
All A file containing all 18 registration memories. KM3
1. Selecting the Load Regist function
Connect a USB memory device, then press the USB button to
enter the USB Menu.
Press the d or c MENU buttons then the VALUE c button to
select the Load Regist function.
The file selection screen will be shown in the LCD display, listing
the registration files stored on the USB memory device.
* Please refer to page 53 for information about the file selection screen.
2. Selecting the registration file to be loaded
Press the d or c VALUE buttons to move the selection cursor,
then press the MENU c button to select the registration file.
The memory selection screen will be shown in the LCD display.
3. Selecting the registration memory
Press the d or c VALUE buttons to select the registration
memory for the registration to be loaded into.
* If an ‘All Registration’ file is selected, this step will be skipped.
4. Loading the selected registration
Press the REC button to load the selected registration.
A confirmation message will be shown in the LCD display.
Press the VALUE c button to confirm the load operation.
Press the PLAY/STOP button to to cancel the load operation.
To use the loaded registration, please refer to the Registration
instructions on page 34.
2 Load Regist
“1SFTT 7"-6&è
‚Rhodes+Bass KM6
PianoStrngs KM6
Registration file
‚Rhodes+Bass KM6
PianoStrngs KM6
Load to: “3&$
= º
Completed.
Are you sure?
“1SFTT 7"-6&è