Kawai CN35 Owner’s Manual - Manual (Page 114)

114
Set
tings
3-4
Layer Dynamics
When using Dual mode, sometimes simply adjusting the volume balance between the two layered sounds is not
enough to create the desired sound character, especially if both sounds are very dynamic. Layering two equally
dynamic sounds can prove difficult to control and play comfortably.
The Layer Dynamics Function allows the dynamic sensitivity of the layered sound to be reduced, in order to improve
the blend between the two combined sounds. In addition to reducing the volume of the layered sound, limiting its
dynamic sensitivity also allows the layered sound to be controlled more easily in relation to the main sound.
1. Selecting the Layer Dynamics setting
After entering the Key Settings menu (page 110):
Press the d or c MENU buttons to select the Layer Dynamics
setting.
2. Adjusting the Layer Dynamics setting
Press the d or c VALUE buttons to decrease or increase the
value of the Layer Dynamics setting.
* The layer dynamics value can be adjusted within the range of Off,
1 - 10.
* Any changes made to the Layer Dynamics setting will remain until the
power is turned off.
* Preferred Layer Dynamics settings can be stored to a Registration
memory for convenient recall. Please refer to page 34 for more
information.
3. Exiting the Layer Dynamics setting
Press the d and c MENU buttons simultaneously to exit the
Layer Dynamics setting and return to the main settings menu.
3-4 LayerDynamic
= 10
3-4 LayerDynamic
= 5
3-4 LayerDynamic
= 10
Key Settings