Kawai CN35 Owner’s Manual - Manual (Page 34)

34
Pl
ay
ing
the
Pi
ano
Registration Memories
The Registration function allows the current instrument setup (sound selection, all settings, etc.) to be stored to
a registration memory, and conveniently recalled at the touch of a button. There are 18 different registration
memories available, with two memories (‘A’ and ‘B’) assigned to each SOUND button.
Registrations can also be loaded from/saved to USB memory devices. Please refer to page 68 for more information.
„
Settings stored in Registration memories
General
Selected sound
Dual Mode / Split Mode (sounds, volume balance, split point)
Reverb, Effects, Touch, Transpose (Key Transpose only)
Metronome (Beat, Tempo, Volume)
Settings
Basic Settings*
Virtual Technician
Key Settings
MIDI Settings
* Speaker Volume, Phones Volume, Line Out Volume, Audio Recorder Gain, and Power Settings will not be stored to Registration memories.
„
Selecting a Registration memory
Press the REGISTRATION button.
The LED indicator for the REGISTRATION button will turn on
to indicate that the registration function is in use, and the
registration selection screen will be shown in the LCD display.
Concert Grand
Press the SOUND buttons to select the desired registration
memory.
º Jazz Organ
/Fretless Bass
Registration º
Press the same SOUND button repeatedly to alternate between
the ‘A’ and ‘B’ memories.
Alternatively, press the d or c VALUE buttons to cycle through
all 18 different registration memories.
„ Exiting Registration mode (restore previous settings)
To return to normal playing mode without selecting the registration
(i.e. restore the previous panel settings):
Press the REGISTRATION button.
The LED indicator for the REGISTRATION button will turn off,
and the instrument will return to normal playing mode.