Kawai CN35 Owner’s Manual - Manual (Page 93)

93
Set
tings
2-3
Damper Noise
When the damper pedal of an acoustic piano is pressed and released, it is often possible to hear the sound of the
damper head touching and releasing the strings.
The CN35 digital piano reproduces this sound, with the Damper Noise setting allowing the volume of this sound to
be adjusted.
* This Virtual Technician setting will affect acoustic piano sounds only.
1. Selecting the Damper Noise setting
After entering the Virtual Technician menu (page 89):
Press the d or c MENU buttons to select the Damper Noise
setting.
2. Adjusting the Damper Noise volume
Press the d or c VALUE buttons to adjust the volume of the
Damper Noise setting.
* The Damper Noise volume can be adjusted within the range of Off, 1
- 10, with higher values resulting in a louder effect.
* Any changes made to the Damper Noise setting will remain until the
power is turned off.
* Preferred Damper Noise settings can be stored to a Registration
memory for convenient recall. Please refer to page 34 for more
information.
3. Exiting the Damper Noise setting
Press the d and c MENU buttons simultaneously to exit the
Damper Noise setting and return to the main settings menu.
2-3 Damper Noise
= 5
2-3 Damper Noise
= 2
2-3 Damper Noise
= 5