Super Systems CAT-100 User Manual
Page 9
Advertising
CAT-100 Operations Manual
Super Systems Inc.
Page 9 of 51
A numeric entry screen will appear.
Enter the Coil Factor that you noted
earlier for the wire coil.
Figure 5 – Entering a new Coil Factor
The Detail screen will now show the
Coil Factor that you entered.
Figure 6 – Detail screen with new Coil Factor shown
Return to the CAT-100 main status screen.
Attach the wire coil to the binding posts as illustrated in Figure 7. Make sure to tighten the
binding posts by turning each screw clockwise; do not overtighten. Also, do not allow the coil to
make contact with the external thermistor.
Advertising