Watson-Marlow 620U - Manual (Page 3)

Watson-Marlow 620UN, 620U, 620SN, 620S User Manual 3
UN, U, SN, S
UN, U, SN, S
UN, U, SN, S
1 Declaration of conformity
This declaration was issued for Watson-Marlow 620UN, 620U, 620SN and
620S pumps on September 19, 2005. When this pump unit is used as a
stand-alone pump it complies with: Machinery Directive 2006/42/EC, EMC
Directive 2004/108/EC.
This pump is ETL listed: ETL control number 3050250. Cert to CAN/CSA
std C22.2 No 61010-1. Conforms to UL std 61010A-1.
See 8 Pump specifications.
2 Declaration of incorporation
When this pump unit is to be installed into a machine or is to be assembled with
other machines for installations, it must not be put into service until the relevant
machinery has been declared in conformity with the Machinery Directive 2006/42.
Responsible person: Christopher Gadsden, Managing Director, Watson-Marlow
Limited, Falmouth, Cornwall TR11 4RU, England. Telephone +44 (0) 1326 370370
Fax +44 (0) 1326 376009.
The information in this user guide is believed to be correct at the time of publica-
tion. However, Watson-Marlow Limited accepts no liability for errors or omissions.
Watson-Marlow Bredel has a policy of continuous product improvement, and
reserves the right to alter specifications without notice. This manual is intended for
use only with the pump it was issued with. Earlier or later models may differ. The
most up-to-date manuals appear on the Watson-Marlow website:
http://www.watson-marlow.com
3 Five-year warranty
520 cased pumps, 620 cased pumps and 720 cased pumps
For any 520, 620 or 720 cased pump purchased after 1 January 2007, Watson-
Marlow Limited (“Watson-Marlow”) warrants, subject to the conditions and excep-
tions below, through either Watson-Marlow, its subsidiaries, or its authorised distrib-
utors, to repair or replace free of charge, any part of the product which fails within
five years of the day of manufacture of the product. Such failure must have occurred
because of defect in material or workmanship and not as a result of operation of the
product other than in normal operation as defined in this pump manual.