Watson-Marlow 620U - Manual (Page 47)

Watson-Marlow 620UN, 620U, 620SN, 620S User Manual 47
UN, U, SN, S
UN, U
16.13 Language
The pump can be set to operate in several languages.
In the fourth screen of the Setup menu select Language using the UP and
DOWN keys. Press ENTER to confirm your choice.
In the next screen, choose a language using the UP and DOWN keys. Press
ENTER to confirm your choice. The pump redisplays the fourth Setup screen in
your chosen language. All screens will subsequently appear in your chosen lan-
guage.
16.14 Defaults
All the pump’s user-set data can be reset to factory defaults.
In the fourth screen of the Setup menu select Defaults using the UP and
DOWN keys. Press ENTER to confirm your choice.
A warning is displayed for four seconds, and the pump asks the user to confirm
that factory defaults are to be reset. Use the UP and DOWN keys to choose
Yes if you wish the pump to reset all user-set data back to factory defaults
(see 12 Switching the pump on for the first time); or No if you do not wish to
do this. Press ENTER to confirm your decision. If Yes was chosen, the pump
resets its factory defaults and redisplays the fourth Setup screen. If No was
chosen, the pump makes no changes to its setup and redisplays the fourth
Setup screen.