ATL Telecom OM100 - Manual (Page 45)

ATL USER GUIDE
OM100 Optical Multiplexer
87 86 ATL USER GUIDE
OM100 Optical Multiplexer
Press "Loop Back" to turn option on or off.
Press "Local Loop" to step to the next parameter.
Remember to press "Remote Loop" to store the parameter values and reboot the modem,
once all parameters have been set to their desired on/off states.
The following table provides a full list of the parameters, and their values, available for
programming, using the front panel controls.
Note: Not all parameters that can be set via the VT100 screens, can be set via the front panel
controls (e.g. the User Port Lock Clock To Reference option).
Anything previously set by the VT100 screens that cannot be accesed from the front panel
controls will remain unchanged. Values that are set via the front panel will override screen
settings.
Note: On the OM100 SF SM Master and OM100 SF SM Slave units, the Master/Slave option is
locked, and any changes to the Master/slave option will not be stored.
Parameter
Number
Local
Loop
Loop
Back Rem
Loop
Test
LED
Description
Off Slave
1 0 0 1
On Master
Off Port 1 Disabled
2 0 1 0
On Port 1 Enabled
Off Port 2 Disabled
3 0 1 1
On Port 2 Enabled
Off Port 3 Disabled
4 1 0 0
On Port 3 Enabled
Off Port 4 Disabled
5 1 0 1
On Port 4 Enabled
Off APS Disabled
6 1 1 0
On APS Enabled