H3C Technologies H3C S12500 Series Switches - Manual (Page 103)

90
• Physical interface—Output physical interface that sends matching packets. If the routing interface
is a physical one, the routing interface and physical interface are the same. If the routing interface
is a logical one, the routing interface and physical interface are different.
• Logical interface—Logical interface for sending packets, such as a VLAN interface or an aggregate
interface.
• Service type—Link layer protocol type, such as PPP or HDLC.
• Action type—Action to be taken on the matching packet, forward or drop.
• Link media type—Related to the link layer protocol used by the routing interface. P2P indicates a
point-to-point link and NBMA indicates a non-broadcast muti-access link.
• Link head information (IP)—Link layer header for IP forwarding.
• Link head information (MPLS)—Link layer header for MPLS forwarding.
98B
Displaying the adjacency table
Execute display commands in any view.
Task Command
Display IPv4 adjacency table information
(in standalone mode).
display adjacent-table { all | physical-interface interface-type
interface-number | routing-interface interface-type interface-number
| slot slot-number } [ count | verbose ]
Display IPv4 adjacency table information
(in IRF mode).
display adjacent-table { all | physical-interface interface-type
interface-number | routing-interface interface-type
interface-number | chassis chassis-number slot slot-number } [ count
| verbose ]