Configuring an ipv6 anycast address – H3C Technologies H3C S12500 Series Switches User Manual
Page 126
113
Manual assignment takes precedence over automatic generation. If you first use automatic generation
and then manual assignment, the manually assigned link-local address overwrites the automatically
generated one. If you first use manual assignment and then automatic generation, the automatically
generated link-local address does not take effect and the link-local address is still the manually assigned
one. If you delete the manually assigned address, the automatically generated link-local address
becomes effective.
390B
Configuring automatic generation of an IPv6 link-local address for an interface
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
interface interface-type
interface-number
N/A
3.
Configure the interface to
automatically generate an
IPv6 link-local address.
ipv6 address auto link-local
By default, no link-local address is
configured on an interface.
After an IPv6 global unicast address is
configured on the interface, a link-local
address is generated automatically.
391B
Manually specifying an IPv6 link-local address for an interface
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
interface interface-type
interface-number
N/A
3.
Manually specify an IPv6
link-local address for the
interface.
ipv6 address ipv6-address
link-local
By default, no link-local address is
configured on an interface.
After an IPv6 global unicast address is
configured on the interface, a link-local
address is generated automatically.
After you configure an IPv6 global unicast address for an interface, the interface automatically generates
a link-local address. The automatically generated link-local address is the same as the one generated by
using the ipv6 address auto link-local command. If a link-local address is manually assigned to an
interface, this manual link-local address takes effect. If the manually assigned link-local address is
removed, the automatically generated link-local address takes effect.
Using the undo ipv6 address auto link-local command on an interface only removes the link-local
address generated by the ipv6 address auto link-local command. If the interface has an IPv6 global
unicast address, it still has a link-local address. If the interface has no IPv6 global unicast address, it has
no link-local address.
261B
Configuring an IPv6 anycast address
Step Command
Remarks
1.
Enter system view.
system-view
N/A