Displaying ddns, Ddns configuration examples, Ddns configuration example 1 – H3C Technologies H3C S12500 Series Switches User Manual

Page 97

Advertising
background image

84

93B

Displaying DDNS

Execute display commands in any view.

Task Command

Display information about the DDNS policy.

display ddns policy [ policy-name ]

94B

DDNS configuration examples

By default, Ethernet, VLAN, and aggregate interfaces are down. To configure such an interface, bring

the interface up by executing the undo shutdown command.

241B

DDNS configuration example 1

364B

Network requirements

As shown in

746H

Figure 37

, Switch is a Web server with the domain name whatever.3322.org.

Switch acquires the IP address through DHCP. Through DDNS service provided by www.3322.org,
Switch informs the DNS server of the latest mapping between its domain name and IP address. Switch

uses the DNS server to translate www.3322.org into the corresponding IP address.

Figure 37 Network diagram

365B

Configuration procedure

Before configuring DDNS on Switch, register with username steven and password nevets at

http://www.3322.org/, add Switch's host name-to-IP address mapping to the DNS server, and make

sure the devices can reach each other.
# Create a DDNS policy named 3322.org, and enter its view.

<Switch> system-view

[Switch] ddns policy 3322.org

# Specify for DDNS update requests the URL address with the login ID steven and password nevets.

Advertising