H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 104)

95
Step Command Remarks
1. Enter system view. system-view N/A
2. Configure the specified VLAN
as an IPv6 multicast VLAN
and enter IPv6 multicast
VLAN view.
multicast-vlan ipv6 vlan-id
No IPv6 multicast VLAN
configured by default
3. Assign the ports to the IPv6
multicast VLAN.
port interface-list
By default, an IPv6 multicast
VLAN has no member ports.
To configure IPv6 multicast VLAN ports in interface view or port group view:
Step Command Remarks
1. Enter system view system-view N/A
2. Configure the specified
VLAN as an IPv6 multicast
VLAN and enter IPv6
multicast VLAN view
multicast-vlan ipv6 vlan-id
A VLAN is not an IPv6
multicast VLAN by default.
3. Return to system view quit N/A
4. Enter interface view or
port group view
• Enter interface view:
interface interface-type interface-number
• Enter port group view:
port-group manual port-group-name
Use either command.
5. Assign the port or ports to
the IPv6 multicast VLAN
port multicast-vlan ipv6 vlan-id
By default, a user port does
not belong to any IPv6
multicast VLAN.
Displaying and maintaining an IPv6 multicast VLAN
Task Command Remarks
Display information about an IPv6
multicast VLAN.
display multicast-vlan ipv6
[ vlan-id ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
IPv6 multicast VLAN configuration examples
Port-based IPv6 multicast VLAN configuration example (for the
WX5000 series)
Network requirements
As shown in Figure 24 , Router connects to an IPv6 multicast source (the source) through Ethernet 1/1,
and to AC through Ethernet 1/2. MLDv1 is required on Router. MLDv1 snooping is required on AC.
Router acts as the MLD querier.