H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 79)

70
[Device] mld-snooping
# Create VLAN 100, and enable MLD snooping in the VLAN. Configure GigabitEthernet 1/0/2
as a trunk port, and assign it to the VLAN.
[Device] vlan 100
[Device-vlan100] mld-snooping enable
[Device-vlan100] quit
[Device] interface GigabitEthernet 1/0/2
[Device-GigabitEthernet1/0/2] port link-type trunk
[Device-GigabitEthernet1/0/2] port trunk permit vlan 100
[Device-GigabitEthernet1/0/2] quit
# Configure the aggregate interface of the OAP card as a hybrid interface, and assign it to VLAN
100.
[Device] interface Bridge-Aggregation 1
[Device-Bridge-Aggregation1] port link-type hybrid
[Device-Bridge-Aggregation1] port hybrid vlan 100 tagged
[Device-Bridge-Aggregation1] quit
# Use the shortcut keys Ctrl + K to exit the switching engine configuration interface and return to the
configuration interface of the access controller engine.
# Configure the client to access the WLAN service and request multicast traffic destined for
FF1E::1.
3. Verify the configuration:
# Display detailed MLD snooping group information in VLAN 100 on AC.
[AC]display mld-snooping group vlan 100 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, A-Aggregation port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):100.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 0 port(s).
IP group(s):the following ip group(s) match to one mac group.
IP group address:FF1E::1
(::, FF1E::1):
Attribute: Host Port
Host port(s):total 1 port(s).
WLAN-DBSS1:0 (D) ( 00:04:17 )
MAC group(s):
MAC group address:3333-0000-0101
Host port(s):total 1 port(s).
WLAN-DBSS1:0
The output shows that WLAN-DBSS 1:0 on AC joins the multicast group FF1E::1.