H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 37
28
<AC>system-view
[AC]igmp-snooping
[AC-igmp-snooping]quit
[AC]vlan 100
[AC-vlan100]igmp-snooping enable
[AC-vlan100]igmp-snooping version 3
[AC-vlan100]quit
# Configure Ten-GigabitEthernet 2/0/1 as a hybrid interface, and assign it to VLAN 100.
[AC]interface Ten-GigabitEthernet 2/0/1
[AC-Ten-GigabitEthernet2/0/1]port link-type hybrid
[AC-Ten-GigabitEthernet2/0/1]port hybrid vlan 100 tagged
[AC-Ten-GigabitEthernet2/0/1]quit
# Log in to the configuration interface of the OAP card of the WX6103 and enable IGMP
snooping globally.
<AC> oap connect slot 0
Press CTRL+K to quit.
Connected to OAP!
User interface aux0 is available.
Press ENTER to get started.
<Device> system-view
[Device] igmp-snooping
# Create VLAN 100, and enable IGMP snooping in the VLAN. Configure GigabitEthernet 0/0/2
as a trunk port, and assign it to VLAN 100.
[Device] vlan 100
[Device-vlan100] igmp-snooping enable
[Device-vlan100] quit
[Device] interface GigabitEthernet 0/0/2
[Device-GigabitEthernet0/0/2] port link-type trunk
[Device-GigabitEthernet0/0/2] port trunk permit vlan 100
[Device-GigabitEthernet0/0/2] quit
# Configure Ten-GigabitEthernet 0/0/1 on the OAP card of the WX6103 as a hybrid interface,
and assign it to VLAN 100.
[Device] interface Ten-GigabitEthernet 0/0/1
[Device-Ten-GigabitEthernet0/0/1] port link-type hybrid
[Device-Ten-GigabitEthernet0/0/1] port hybrid vlan 100 tagged
[Device-Ten-GigabitEthernet0/0/1] quit
# Use the shortcut keys Ctrl + K to exit the OAP configuration interface and return to the AC
configuration interface.
# Configure the client to access the WLAN service and request multicast traffic destined for
224.1.1.1.
3.
Verify the configuration:
# Display detailed IGMP snooping group information in VLAN 100 on AC.
[AC]display igmp-snooping group vlan 100 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).