Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 40
31
# Display detailed IGMP snooping group information in VLAN 100 on AC.
[AC]display igmp-snooping group vlan 100 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port, P-PIM port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):100.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 0 port(s).
IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
(0.0.0.0, 224.1.1.1):
Attribute: Host Port
Host port(s):total 1 port(s).
WLAN-DBSS1:0 (D) ( 00:04:17 )
MAC group(s):
MAC group address:0100-5e01-0101
Host port(s):total 1 port(s).
WLAN-DBSS1:0
The output shows that WLAN-DBSS 1:0 on AC joins the multicast group 224.1.1.1.
Multicast delivery to a wireless client (for the WX3024)
Network requirements
As shown in
, the multicast source 1.1.1.1/24 and forwards multicast traffic to multicast group
224.1.1.1. The client is a member of the multicast group.
The client and the source can communicate with each other and the client can receive multicast traffic
from the source.
Figure 7 Network diagram
Router A
Source
AC
GE 1/0/1
GE 1/0/2
Multicast Packets
AP
Client
Switch
WLAN-ESS1