H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 84
Advertising
75
3.
Use the display current-configuration command to check whether the function of dropping
unknown IPv6 multicast data is enabled. If not, use the drop-unknown or mld-snooping
drop-unknown command to enable the function of dropping unknown IPv6 multicast data.
4.
Use the display mld-snooping group command to check whether any port has been configured as
a static member port of any IPv6 multicast group. If so, check whether this configuration conflicts
with the configured IPv6 multicast group policy. If any conflict exists, remove the port as a static
member of the IPv6 multicast group.
Advertising
This manual is related to the following products: