H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 71)

62
User interface aux0 is available.
Press ENTER to get started.
<AC> system-view
# Configure the WLAN-ESS interface and assign WLAN ESS 1 to VLAN 100.
[AC]Vlan 100
[AC-vlan100]quit
[AC]interface WLAN-ESS 1
[AC-WLAN-ESS1]port access vlan 100
[AC-WLAN-ESS1]quit
# Configure a WLAN service template with its SSID as multicast and authentication method as
open-system. Bind the WLAN-ESS interface with the service template.
[AC]wlan service-template 1 clear
[AC-wlan-st-1]ssid Multicast
[AC-wlan-st-1]bind WLAN-ESS 1
[AC-wlan-st-1]authentication-method open-system
[AC-wlan-st-1]service-template enable
[AC-wlan-st-1]quit
# Create AP template ap of model WA2100 and configure its serial ID as
210235A29G007C00001.
[AC]wlan ap ap model WA2100
[AC-wlan-ap-ap]serial-id 210235A29G007C00001
# Configure the type of radio 1 of the AP as 802.11g and map the service template to the current
radio.
[AC-wlan-ap-ap]radio 1 type dot11g
[AC-wlan-ap-ap-radio-1]service-template 1
[AC-wlan-ap-ap-radio-1]radio enable
[AC-wlan-ap-ap-radio-1]quit
[AC-wlan-ap-ap]quit
# Enable all radios.
[AC]wlan radio enable all
2. Configure the wireless client to join the IPv6 multicast group:
# Enable MLD snooping in VLAN 100.
[AC] mld-snooping
[AC-mld-snooping]quit
[AC]vlan 100
[AC-vlan100] mld-snooping enable
[AC-vlan100] quit
# For the LSWM1WCM10 access controller module, configure Ten-GigabitEthernet1/0/1 of AC
as a hybrid interface, and assign it to VLAN 100.
[AC]interface Ten-GigabitEthernet 1/0/1
[AC-Ten-GigabitEthernet1/0/1]port link-type hybrid
[AC-Ten-GigabitEthernet1/0/1]port hybrid vlan 100 tagged
[AC-Ten-GigabitEthernet1/0/1]quit
# For the LSWM1WCM20 access controller module, configure the aggregate interface of AC as
a hybrid interface, and assign it to VLAN 100.
[AC]interface Bridge-Aggregation 1