H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 42
33
<AC> oap connect slot 0
Press CTRL+K to quit.
Connected to OAP!
User interface aux0 is available.
Press ENTER to get started.
<Device> system-view
[Device] igmp-snooping
# Create VLAN 100, and enable IGMP snooping in the VLAN. Configure GigabitEthernet 1/0/2
as a trunk port, and assign it to the VLAN,
[Device] vlan 100
[Device-vlan100] igmp-snooping enable
[Device-vlan100] quit
[Device] interface GigabitEthernet 1/0/2
[Device-GigabitEthernet1/0/2] port link-type trunk
[Device-GigabitEthernet1/0/2] port trunk permit vlan 100
[Device-GigabitEthernet1/0/2] quit
# Configure the aggregate interface of the OAP card as a hybrid interface, and assign it to VLAN
100.
[Device] interface Bridge-Aggregation 1
[Device-Bridge-Aggregation1] port link-type hybrid
[Device-Bridge-Aggregation1] port hybrid vlan 100 tagged
[Device-Bridge-Aggregation1] quit
# Use the shortcut keys Ctrl + K to exit the OAP configuration interface and return to the AC
configuration interface.
# Configure the client to access the WLAN service and request multicast traffic destined for
224.1.1.1.
3.
Verify the configuration:
# Display detailed IGMP snooping group information in VLAN 100 on AC.
[AC]display igmp-snooping group vlan 100 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, A-Aggregation port, C-Copy port, P-PIM
port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):100.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 0 port(s).
IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
(0.0.0.0, 224.1.1.1):
Attribute: Host Port
Host port(s):total 1 port(s).
WLAN-DBSS1:0 (D) ( 00:04:17 )