H3C Technologies H3C SecPath F1000-E - Manual (Page 137)

41
[DeviceE-pim] c-bsr gigabitethernet 3/2 32 20
[DeviceE-pim] c-rp gigabitethernet 3/2 group-policy 2005
[DeviceE-pim] quit
Step4 Verify the configuration
Carry out the display pim interface command to view the PIM configuration and running status on
each interface. For example:
# Verify the PIM configuration information on Device A.
[DeviceA] display pim interface
VPN-Instance: public net
Interface NbrCnt HelloInt DR-Pri DR-Address
GE1/1 0 30 1 10.110.1.1 (local)
GE2/0 1 30 1 192.168.1.2
GE3/0 1 30 1 192.168.9.2
To view the BSR election information and the locally configured C-RP information in effect on a device,
use the display pim bsr-info command. For example:
# View the BSR information and the locally configured C-RP information in effect on Device A.
[DeviceA] display pim bsr-info
VPN-Instance: public net
Elected BSR Address: 192.168.9.2
Priority: 20
Hash mask length: 32
State: Accept Preferred
Scope: Not scoped
Uptime: 00:40:40
Expires: 00:01:42
# View the BSR information and the locally configured C-RP information in effect on Device D.
[DeviceD] display pim bsr-info
VPN-Instance: public net
Elected BSR Address: 192.168.9.2
Priority: 20
Hash mask length: 32
State: Accept Preferred
Scope: Not scoped
Uptime: 00:05:26
Expires: 00:01:45
Candidate BSR Address: 192.168.4.2
Priority: 10
Hash mask length: 32
State: Candidate
Scope: Not scoped
Candidate RP: 192.168.4.2(GigabitEthernet3/0)
Priority: 192
HoldTime: 150
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:34