H3C Technologies H3C SecPath F1000-E User Manual
Page 91
30
[DeviceA-GigabitEthernet1/1] quit
[DeviceA] interface gigabitethernet 2/1
[DeviceA-GigabitEthernet2/1] pim sm
[DeviceA-GigabitEthernet2/1] quit
[DeviceA] interface gigabitethernet 3/1
[DeviceA-GigabitEthernet 3/1] pim sm
[DeviceA-GigabitEthernet 3/1] quit
[DeviceA] interface loopback 0
[DeviceA-LoopBack0] pim sm
[DeviceA-LoopBack0] quit
The configuration on Device B, Device C and Device D is similar to the configuration on Device A. The
specific configuration steps are omitted here.
# Configure PIM domain borders on Device C.
[DeviceC] interface gigabitethernet 3/1
[DeviceC-GigabitEthernet 3/1] pim bsr-boundary
[DeviceC-GigabitEthernet 3/1] quit
[DeviceC] interface gigabitethernet 3/2
[DeviceC-GigabitEthernet 3/2] pim bsr-boundary
[DeviceC-GigabitEthernet 3/2] quit
[DeviceC] interface gigabitethernet 2/1
[DeviceC-GigabitEthernet2/1] pim bsr-boundary
[DeviceC-GigabitEthernet2/1] quit
The configuration on Device A, Device B and Device D is similar to the configuration on Device C. The
specific configuration steps are omitted here.
Step3
Configure C-BSRs and C-RPs
# Configure Loopback 0 on Device A as a C-BSR and a C-RP.
[DeviceA] pim
[DeviceA-pim] c-bsr loopback 0
[DeviceA-pim] c-rp loopback 0
[DeviceA-pim] quit
The configuration on Device C and Device D is similar to the configuration on Device A. The specific
configuration steps are omitted here.
Step4
Configure MSDP peers
# Configure an MSDP peer on Device A.
[DeviceA] msdp
[DeviceA-msdp] peer 192.168.1.2 connect-interface gigabitethernet 3/1
[DeviceA-msdp] quit
# Configure MSDP peers on Device C.
[DeviceC] msdp
[DeviceC-msdp] peer 192.168.1.1 connect-interface gigabitethernet 3/1
[DeviceC-msdp] peer 10.110.5.2 connect-interface gigabitethernet 2/1