H3C Technologies H3C SecPath F1000-E - Manual (Page 200)

37
[DeviceA-GigabitEthernet1/1] pim ipv6 dm
[DeviceA-GigabitEthernet1/1] quit
[DeviceA] interface gigabitethernet 2/0
[DeviceA-GigabitEthernet2/0] pim ipv6 dm
[DeviceA-GigabitEthernet2/0] quit
The configuration on Device B and Device C is similar to that on Device A.
# On Device D, enable IPv6 multicast routing and enable IPv6 PIM-DM on each interface.
<DeviceD> system-view
[DeviceD] multicast ipv6 routing-enable
[DeviceD] interface gigabitethernet 1/1
[DeviceD-GigabitEthernet1/1] pim ipv6 dm
[DeviceD-GigabitEthernet1/1] quit
[DeviceD] interface gigabitethernet 2/0
[DeviceD-GigabitEthernet2/0] pim ipv6 dm
[DeviceD-GigabitEthernet2/0] quit
[DeviceD] interface gigabitethernet 3/0
[DeviceD-GigabitEthernet3/0] pim ipv6 dm
[DeviceD-GigabitEthernet3/0] quit
[DeviceD] interface gigabitethernet 3/1
[DeviceD-GigabitEthernet3/1] pim ipv6 dm
[DeviceD-GigabitEthernet3/1] quit
Step3 Verify the configuration
Carry out the display pim ipv6 interface command to view the IPv6 PIM configuration and running
status on each interface. For example:
# Verify the IPv6 PIM configuration information on Device D.
[DeviceD] display pim ipv6 interface
Interface NbrCnt HelloInt DR-Pri DR-Address
GE1/1 0 30 1 4001::1
(local)
GE2/0 0 30 1 1002::2
(local)
GE3/0 1 30 1 2002::2
(local)
GE3/1 1 30 1 3001::2
(local)
Carry out the display pim ipv6 neighbor command to view the IPv6 PIM neighboring relationships
among the devices. For example:
# Verify the IPv6 PIM neighboring relationships on Device D.
[DeviceD] display pim ipv6 neighbor
Total Number of Neighbors = 3
Neighbor Interface Uptime Expires Dr-Priority
1002::1 GE2/0 00:04:00 00:01:29 1
2002::1 GE3/0 00:04:16 00:01:29 3
3001::1 GE3/1 00:03:54 00:01:17 5