H3C Technologies H3C SecPath F1000-E User Manual
Page 209
46
Configure OSPFv3 on the devices in the IPv6 PIM-SM domain to ensure network-layer reachability
among them. Detailed configuration steps are omitted here.
Step2
Enable IPv6 multicast routing and IPv6 administrative scoping, and enable IPv6 PIM-SM and MLD
# Enable IPv6 multicast routing and IPv6 administrative scoping on Device A, enable IPv6 PIM-SM on
each interface, and enable MLD on the host-side interface GigabitEthernet 1/1.
<DeviceA> system-view
[DeviceA] multicast ipv6 routing-enable
[DeviceA] pim ipv6
[DeviceA-pim6] c-bsr admin-scope
[DeviceA-pim6] quit
[DeviceA] interface gigabitethernet 1/1
[DeviceA-GigabitEthernet1/1] mld enable
[DeviceA-GigabitEthernet1/1] pim ipv6 sm
[DeviceA-GigabitEthernet1/1] quit
[DeviceA] interface gigabitethernet 2/1
[DeviceA-GigabitEthernet2/1] pim ipv6 sm
[DeviceA-GigabitEthernet2/1] quit
The configuration on Device E and Device I is similar to the configuration on Device A.
# On Device B, enable IPv6 multicast routing and IPv6 administrative scoping, and enable IPv6 PIM-SM
on each interface.
<DeviceB> system-view
[DeviceB] multicast ipv6 routing-enable
[DeviceB] pim ipv6
[DeviceB-pim6] c-bsr admin-scope
[DeviceB-pim6] quit
[DeviceB] interface gigabitethernet 1/1
[DeviceB-GigabitEthernet1/1] pim ipv6 sm
[DeviceB-GigabitEthernet1/1] quit
[DeviceB] interface gigabitethernet 2/1
[DeviceB-GigabitEthernet2/1] pim ipv6 sm
[DeviceB-GigabitEthernet2/1] quit
[DeviceB] interface gigabitethernet 3/1
[DeviceB-GigabitEthernet3/1] pim ipv6 sm
[DeviceB-GigabitEthernet3/1] quit
[DeviceB] interface gigabitethernet 3/2
[DeviceB-GigabitEthernet3/2] pim ipv6 sm
[DeviceB-GigabitEthernet3/2] quit
The configuration on Device C, Device D, Device F, Device G, and Device H is similar to the configuration
on Device B. The specific configuration steps are omitted here.
Step3
Configure an IPv6 admin-scope zone boundary
# On Device B, configure GigabitEthernet 3/1 and GigabitEthernet 3/2 as the boundary of IPv6
admin-scope zone 1.
[DeviceB] interface gigabitethernet 3/1
[DeviceB-GigabitEthernet3/1] multicast ipv6 boundary scope 4
[DeviceB-GigabitEthernet3/1] quit
[DeviceB] interface gigabitethernet 3/2