H3C Technologies H3C SecPath F1000-E User Manual
Page 143
47
[DeviceB-GigabitEthernet3/2] multicast boundary 239.0.0.0 8
[DeviceB-GigabitEthernet3/2] quit
# On Device C, configure GigabitEthernet 3/1 and GigabitEthernet 3/2 as the boundary of
admin-scope zone 2.
<DeviceC> system-view
[DeviceC] interface gigabitethernet 3/1
[DeviceC-GigabitEthernet3/1] multicast boundary 239.0.0.0 8
[DeviceC-GigabitEthernet3/1] quit
[DeviceC] interface gigabitethernet 3/2
[DeviceC-GigabitEthernet3/2] multicast boundary 239.0.0.0 8
[DeviceC-GigabitEthernet3/2] quit
# On Device D, configure GigabitEthernet 3/1 as the boundary of admin-scope zone 2.
<DeviceD> system-view
[DeviceD] interface gigabitethernet 3/1
[DeviceD-GigabitEthernet3/1] multicast boundary 239.0.0.0 8
[DeviceD-GigabitEthernet3/1] quit
Step4
Configure C-BSRs and C-RPs
# On Device B, configure the service scope of RP advertisements and configure GigabitEthernet 2/1 as
a C-BSR and C-RP of admin-scope zone 1.
[DeviceB] acl number 2001
[DeviceB-acl-basic-2001] rule permit source 239.0.0.0 0.255.255.255
[DeviceB-acl-basic-2001] quit
[DeviceB] pim
[DeviceB-pim] c-bsr group 239.0.0.0 8
[DeviceB-pim] c-bsr gigabitethernet 2/1
[DeviceB-pim] c-rp gigabitethernet 2/1 group-policy 2001
[DeviceB-pim] quit
# On Device D, configure the service scope of RP advertisements and configure GigabitEthernet 2/1 as
a C-BSR and C-RP of admin-scope zone 2.
[DeviceD] acl number 2001
[DeviceD-acl-basic-2001] rule permit source 239.0.0.0 0.255.255.255
[DeviceD-acl-basic-2001] quit
[DeviceD] pim
[DeviceD-pim] c-bsr group 239.0.0.0 8
[DeviceD-pim] c-bsr gigabitethernet 2/1
[DeviceD-pim] c-rp gigabitethernet 2/1 group-policy 2001
[DeviceD-pim] quit
# On Device F, configure GigabitEthernet 2/1 as a C-BSR and C-RP in the global scope zone.
<DeviceF> system-view
[DeviceF] pim
[DeviceF-pim] c-bsr global
[DeviceF-pim] c-bsr gigabitethernet 2/1
[DeviceF-pim] c-rp gigabitethernet 2/1
[DeviceF-pim] quit
Step5
Verify the configuration