Epson EcoTank ET-4550 - Manual (Page 112)

Related Information
& “Environmental Specifications” on page 132
& “Available Paper and Capacities” on page 26
& “Paper Handling Precautions” on page 25
Paper Jams
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
& “Loading Paper in the Paper Cassette” on page 27
Paper Feeds at a Slant
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
& “Loading Paper in the Paper Cassette” on page 27
No Paper Feeds
Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not load above
the line indicated by the triangle symbol on the edge guide.
Related Information
& “Available Paper and Capacities” on page 26
Several Sheets of Paper are Fed at a Time
When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is loaded
in the printer before you reload the paper.
Original Does Not Feed in the ADF
❏ Use originals supported by the ADF.
❏ Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
❏ Clean the inside of the ADF.
❏ Do not load originals above the line indicated by the triangle symbol on the edge guide.
❏ Check that the ADF icon appears on the control panel. If it does not appear, place the originals again.
Related Information
& “Available Originals for the ADF” on page 31
& “Placing Originals on the ADF” on page 31
User's Guide
Solving Problems
112